DATE: April 28, 1999

"TAC" Controls PRESS - RELEASE (Formerly Tour & Andersson Control)

FROM: Steve Karsten General Manager Grand Valley Automation Inc Midwest Distribution Center "USA Partner" TAC Control Systems

TAC Xentatm #102-ES Lonmark  approved VAV Zone Controller for LonWorks  networks:

TAC has released the #102-ES LonMark approved Zone Controller. The #102-ES controller meets the LonMark open protocol profile for VAV. The controller can be used on a LonWorks open protocol network or operate as a "stand alone" controller. The #102-ES compliments the present line-up of Zone Controllers for VAV box's, Fan-Coil units and HVAC Single Zone equipment. The TAC Xenta #102-ES controller can be connected by way of the LonWorkstm network directly to TAC Vista Central System front end to make a complete Building Automation package with color graphics, alarms, and data logs.

[an error occurred while processing this directive]The TAC Xenta #102-ES controller has built-in customizing options for field configuration for most all VAV box applications. Field setup is accomplished via the hand held digital LCD key-pad terminal or via a standard LonWorks network management tools. The compact "touch proof" design and standard DIN mount makes the TAC Xenta 102-ES controller suitable for installation in many locations without the need for an additional enclosure. Application and set-up data is stored on "Flash Memory" which eliminates the need for battery backup.

TAC Xenta tm #104A Lonmark  Roof Top Unit Zone Controller for Echelon  networks:

TAC has released the #104A Lonmark approved Zone Controller. The #104A controller meets the Lonmark open protocol profile for Roof Top Controller. The controller can be used on an Echelon TP-FT10 Lonworks open protocol network or operate as a "stand alone" controller. The #104A compliments the present line-up of Zone Controllers for VAV box's, Fan-Coil units and HVAC Single Zone equipment. The TAC Xenta #104A controller can be connected by way of the Echelon tm network directly to TAC Vista Central System front end to make a complete Building Automation package.

The TAC Xenta #104A controller has built-in customizing options for field configuration for School Classroom Unit-ventilators plus other unitary HVAC systems. Field setup is accomplished via the hand held digital LCD key-pad terminal. The controller is ETL listed and also rated for low ambient Roof Top installations. The compact "touch proof" design and standard DIN mount makes the TAC Xenta 104A controller suitable for installation in many close fit locations. Application and set-up data is stored on "Flash Memory" which eliminates the need for battery backup.

Economizer and DX lockout can be accomplished via a connected outdoor air sensor, network outdoor temperature, or network enthalpy variable. Other standard HVAC unit functional options are included, such as; Choice of continuous or cycle fan, cascade or room control, two stage or tri-state heat output, mixed or discharge air control, adjustable anti-cycle timers, emergency smoke purge, IAQ mixed air low limit override, etc..

[an error occurred while processing this directive]
[Click Banner To Learn More]

[Stay Informed - Subscribe to our Update Mailing List]
[Home Page] [Contact Us] [The Automator - Current Issue]
[News] [Systems] [Products] [Resources] [About]

Visit Home Toys to Learn about Home Automation

Web Design by HomeToys
©Enviromation 1999