December 2006 |
[an error occurred while processing this directive] |
07 ASHRAE Measures to Attain Major Energy Savings Shared at ASHRAE Seminar
[an error occurred while processing this directive] |
ATLANTA Guidance for building design engineers and owners that will result in buildings cutting their energy usage in half by 2010 currently is being developed by leading organizations in the building environment industry.
Achieving that goal will require more than simply substituting or adopting new technologies and systems. It will acquire changes in design practice in which the design team converts energy strategies into building plans, sections, details and construction.
An update on some of the measures that have been
demonstrated to yield significant energy reductions will be presented at
ASHRAEs 2007 Winter Meeting in a seminar, Achieving 50% and Beyond Approach to
Net Zero Energy Use in Buildings Part 1. It takes place from 7:45-9:15 a.m.
Monday, Jan. 29, and is followed by Part 2 from 10:45 a.m.-12:15 p.m.
The guidance is being developed by ASHRAE in cooperation with the American
Institute of Architects, the Illuminating Engineering Society of North America
and the U.S. Green Building Council, through a series of Advanced Energy Design
Guides for the commercial building sector.
John Mitchell, P.E., is chairing a scoping committee studying ways to achieve building designs as close as is feasible to net zero energy use, defined as a building which, on an annual basis, uses no more energy than is provided by the buildings on-site renewable energy sources. This study will provide the basis for the development of Advanced Energy Design Guides to go 50 percent and beyond minimum standards for energy use.
The goal of a 50 percent approach to net zero energy use, on either a site or source basis, is feasible, he said. There are no apparent technological barriers to achieve the desired energy reductions but aggressive energy conservation strategies and energy generation are needed.
The scoping study recently was completed and
identified measures that achieve significant energy savings. Some of the
measures identified are:
Improved daylighting and electrical illumination systems
Reduction of parasitic power requirements in air and water distribution
systems
Separate treatment of ventilation and internal thermal loads
Improved delivery of conditioning to where it is needed
Improved part load performance of HVAC components
Water loop heat pump systems.
Information related to the Advanced Energy Design Guide series can be found at www.ashrae.org/aedg.
Speakers in the seminars are:
Net Zero Energy Building Ideas The Path Toward Net Zero Energy Use, John W.
Mitchell, Ph.D., P.E., University of Wisconsin, Madison
Architectural Perspective as a Bridge to Engineering, Jeff Levine, American
Institute of Architects, New York, N.Y.
What Has Been Done? Case Study Review, David Hewitt, New Buildings Institute,
White Salmon, Wash.
Integrated Design Process Making it Possible, Jeff Levine, American
Institute of Architects, New York, N.Y.
Daylighting Advanced Lighting, Daylighting and Controls, Stephen Selkowitz,
Lawrence Berkeley National Laboratory, Berkeley, Calif.
Distribution Systems Air, Wayne Reedy, Carrier Corp., Indianapolis, Ind.
Distribution Systems Water, Stephen Kavanaugh, Ph.D., University of Alabama,
Tuscaloosa, and Harvey Sachs, Ph.D., American Council for an Energy-Efficient
Economy, Washington, D.C.
HVAC/Ventilation, Michael Brandemuehl, Ph.D., University of Colorado, Boulder,
Colo.
Held with the ASHRAE Winter Meeting is the ASHRAE co-sponsored International
Air-Conditioning, Heating, Refrigerating Exposition, Jan. 29-31, at McCormick
Place. For more information, visit
www.ahrexpo.com.
For more information about the ASHRAE meeting, visit www.ashrae.org/dallas.
ASHRAE, founded in 1894, is an international organization of 55,000 persons. ASHRAE fulfills its mission of advancing heating, ventilation, air conditioning and refrigeration to serve humanity and promote a sustainable world through research, standards writing, publishing and continuing education.
[an error occurred while processing this directive]
[Click Banner To Learn More]
[Home Page] [The Automator] [About] [Subscribe ] [Contact Us]