February 2013 |
[an error occurred while processing this directive] |
|
Lighting Efficiency Improvements Proposed for Standard 90.1
Articles |
Interviews |
Releases |
New Products |
Reviews |
[an error occurred while processing this directive] |
Editorial |
Events |
Sponsors |
Site Search |
Newsletters |
[an error occurred while processing this directive] |
Archives |
Past Issues |
Home |
Editors |
eDucation |
[an error occurred while processing this directive] |
Training |
Links |
Software |
Subscribe |
[an error occurred while processing this directive] |
ATLANTA – Proposed changes to the ASHRAE/IES energy standard will
require automatic lighting controls in more space types and shorten the
times before lighting is automatically reduced or shut off.
Addendum by to ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for
Buildings Except Low-Rise Residential Buildings, was developed in
response to requests from the design community, which asked for a
tabular structure for specifying the controls requirements. By putting
these requirements into an easier-to-use tabular format, the provisions
will be clearer, more likely to be complied with and easier to enforce,
according to Eric Richman, chair of the standard’s lighting
subcommittee.
The addendum is open for public review from Feb. 15-April 1, 2013. For more information, visit www.ashrae.org/publicreviews.
“The proposed addendum is the product of both the interest in
increasing lighting controls use where practical and simplifying the
standard,” Richman said.
The 2010 version of the standard includes basic shutoff and occupancy
sensor type controls in selected spaces. The addendum will
increase the use of occupancy based control to all spaces in a building
where practical. At the same time, additional partial on and
partial off controls are added to further reduce full on lighting when
spaces are typically unoccupied. For example, many spaces that
are not always practical applications for full automatic off (such as
corridors) would require at least partial automatic off when the space
is unoccupied.
The new tabular format allows users to see all requirements for most
interior space types and categories in one simple look-up table.
[an error occurred while processing this directive]
“This new representation and update of control requirements will reduce
the time that lighting is on at full levels in many spaces and make the
requirements easier to understand and therefore comply with and inspect
to,” he said. “Both of these conditions will improve energy efficiency
of the building.”
Also open for public review is addendum ay from Feb. 15-March 17, 2013.
The proposed addendum corrects a couple of small editorial issues and
raises the threshold for when daylight responsive controls are required
so that they are cost effective in all climate zones.
ASHRAE, founded in 1894, is a building technology society with more
than 50,000 members worldwide. The Society and its members focus on
building systems, energy efficiency, indoor air quality, refrigeration
and sustainability within the industry. Through research, standards
writing, publishing and continuing education, ASHRAE shapes tomorrow’s
built environment today.
For more information about ASHRAE visit http://www.ashrae.org
[an error occurred while processing this directive]
[Click Banner To Learn More]
[Home Page] [The Automator] [About] [Subscribe ] [Contact Us]