The Wiremold Company News 

[an error occurred while processing this directive]Cabling Pathways for Fiber Optic Systems

WEST HARTFORD, Conn. - The Wiremold Company has developed a family of FiberReady^TM fittings for its wire and cable management systems that maintain a two-inch cable bend radius. These fittings meet the bend radius specifications for the broadest range of optical fiber, as well as twisted pair and coaxial cabling that is commonly installed in horizontal distribution.

These enhancements to Wiremold wire and cable management systems include:

• Vertical pivot connectors that attach to the rungs of SpecMate^TM cable tray to provide bend radius protection for fiber optic and high-performance UTP cabling.
• Perimeter raceway systems ranging from small Wiremold® 2300 Series nonmetallic raceway and 2400 Series steel raceway to high-capacity 5400 Series and 5500 Series raceway have been redesigned to include bend radius protection throughout. Bend radius inserts are available for upgrading older installed systems.
• The ®Walkerduct Pro Series underfloor duct system includes cable loop storage in the preset, system-wide bend radius protection, and space for mounting ST- and SC-type fiber optic connectors. Walker cellular floor systems have also been modified to include bend radius protection.

Fiber Optic Passive Interconnect Components

WEST HARTFORD, Conn. - The Wiremold® Interlink Cabling System has expanded to include FiberSmart™ Passive Interconnect Components. This family of components includes:

• STA Series - a complete line of ST® compatible adapters.
• SCA Series - a complete line of SC compatible adapters.
• FC style adapters - singlemode FC/PC adapter is compliant with NTT-FC specifications. The FC/APC adapter is compatible with Seikoh Giken style connectors.
• CSC Series SC connectors - Available for both multimode and singlemode applications, the design provides non-optical disconnect terminations.
• ST connectors - High performance connectors for multimode and singlemode applications. They meet EIA/TIA and IEC performance specifications and are intermatable with AT&T ST, STII and functional equivalents. Also available is a cost-effective ST multimode polymer ferrule connector.
• ILBR Series in-line low backreflection attenuator - A new type of low backreflection, male-to-female, inline attenuator.

These products were formerly manufactured by the Connectivity Group of Radiant Communications, Inc., which was recently acquired by The Wiremold Company. 

Rack Mount Fiber Optic Fiber Management

[an error occurred while processing this directive]WEST HARTFORD, Conn. - The Wiremold® Interlink Cabling System has expanded to include a full range of rack mount fiber management products. These FiberSmart™ products provide solutions from the building entrance through main and intermediate cross connects to the telecommunications closet.

• RACK Series can be mounted in 19" or 23" equipment frames. Patch capacities include 12-, 24-, 48-, 72-, 96- and 144-ports. Openings in top, side (front and rear), back, and bottom for cable entry.
• RPS (Rack Patch Splice) Series rack-mount patch/splice center can accommodate up to 44 patch and splice channels. Separate patch and splice bays have their own door, and the splice bay incorporates a slide out shelf.
• POP (Point of Presence) Series, a convenient, cost-effective solution for terminating OSP cable to fiber optic terminal equipment. This rack mounted patch panel is ideal for building entrance applications. It can be prewired for singlemode and multimode applications and accommodates up to 72 patch and splice channels.
• Prewired Pigtail Modules facilitate pigtail splicing in the main cross-connect (MC) or intermediate cross-connect (IC). The PPM6 Series provides a protective modular enclosure for six pre-terminated connectors.
• RS6 Series patch panel adapter strips combine high performance adapters with a complete line of cable management systems. The adapter panels are used with Wiremold Interlink Cabling System wall and rack mount patch panels and rack mount patch and splice bays. RS6 strips are available with SMA, ST, SC, SC/APC, FC and FC/APC adapters.
• SV432 splice vault is designed for splicing fiber optic cables in building entrance and Telco central office environments. This unit provides easy access and protection for high fiber count applications.
• ERACK termination and splice shelf panels employ an open shelf design with a hinged/removable front panel. A high quality alternative to closed shelf units, ERACK is an excellent choice for low fiber count telecommunication closet applications.

These products were formerly manufactured by the Connectivity Group of Radiant Communications, Inc., which was recently acquired by The Wiremold Company.

Cabling System Adds Fiber Optic Capability

WEST HARTFORD, Conn. - The Wiremold® Interlink Cabling System offers full fiber optic capability. New additions to this versatile system include FiberSmart™ passive interconnect components, fiber management products, and test/termination kits. These products were formerly manufactured by the Connectivity Group of Radiant Communications, Inc., which was recently acquired by The Wiremold Company.

The Wiremold Interlink Cabling System is a comprehensive solution for premises wiring using UTP or fiber optic cable. It includes building entrance and communications closet hardware, wire and cable management systems, and workstation connectivity.

Test and Termination Accessories

WEST HARTFORD, Conn. - The Wiremold® Interlink Cabling System offers test and termination kits. These kits facilitate the installation and testing of FiberSmart™ products.

The TK Series termination kit features the QuickTerm solution that allows for connector polishing approximately 2 minutes after connector termination.

TE Series test kits are available for testing LANs, and short and long haul WANs, and come complete with launch cables and mating adapters. This battery-operated equipment allows for 8 hours of field measurement time.

Wall Mount Fiber Optic Fiber Management

WEST HARTFORD, Conn. - The Wiremold® Interlink Cabling System has expanded to include a full range of wall mount fiber management products. These FiberSmart™ fiber management products include:

• WALL Series wall mount patch panels are available from 12-port to 96-port capacity. Offering a lockable trunk compartment, a WALL series panel may be used as a demarcation point at the customer's premise.
• PFOB (Pre-wired Fiber Optic Backbone) Series, a cost-effective solution for installing either centralized (collapsed) or decentralized backbones, or custom networks. This pre-engineered system utilizes pre-measured, pre-terminated and pre-tested components, aimed at reducing time and cost for consumers and contractors.
• Indoor Fiber Optic WALL SPLICE Series is available in two sizes - 48 and 96 splices. Two compartments isolate trunk and distribution cable. Can be stacked with WALL Series patching cabinets.
• Series NEMA patch 24- or 48-port panels meet or exceed all NEMA 3 ratings. They feature a single outer door with internal gasketing, a rain cap with screened vents, and all stainless steel hardware. A second inner door provides additional security. The NEMA enclosures can accommodate ST, SC (simplex), FC and SMA Adapters.
• SV432 splice vault is designed for splicing fiber optic cables in building entrance and telco central office environments. This unit provides easy access and protection for high fiber count applications.
• RS6 Series patch panel adapter strips combine high performance adapters with a complete line of cable management systems. The adapter panels are used with Wiremold Interlink Cabling System wall and rack mount patch panels and rack mount patch and splice bays. RS6 strips are available with SMA, ST, SC, SC/APC, FC and FC/APC adapters.

These products were formerly manufactured by the Connectivity Group of Radiant Communications, Inc., which was recently acquired by The Wiremold Company. 

For more information on any of these products visit www.wiremold.com

[an error occurred while processing this directive]
[Click Banner To Learn More]

[Stay Informed - Subscribe to our Update Mailing List]
[Home Page] [Contact Us] [The Automator - Current Issue]
[News] [Resources] [Products] [Systems] [About]

Visit Home Toys to Learn about Home Automation

Web Design by Enviromation