AutomatedBuildings.com
|
Innovations in Comfort, Efficiency, and Safety Solutions. |
New Products
Wireless Monitoring of HVAC Equipment
This transceiver is part of the Notifact network for wireless monitoring of HVAC equipment. It is designed to monitor the operation of single compressor rooftop or refrigeration units. At the Notifact web site, the user configures which individuals will receive a message regarding certain operating conditions and the delivery method. Delivery methods include pagers (alphanumeric, numeric), fax, e-mail, PCS or telephone (voice delivery).
The message sent out will contain the condition which generated the transmission, and also the make, model, and location of the equipment.
The transceiver is powered by the equipment power source and constantly monitors various inputs. When an input is out of range, the transceiver transmits the condition over the North American AMPS (advanced mobile phone system). The transmission is received at the Notifact messaging center and then relayed to the selected message recipients by the configured delivery method. Every 24 hours, the transceiver will also transmit to the Notifact message center information about itself and the unit it is monitoring. This transmission tells the Notifact center that the transceiver is properly functioning, powered, and able to transmit.
Information for the equipment monitored includes: Any conditions that are still pending, fan run time and number of cycles in the last 24 hours, and compressor run times and number of cycles in the last 24 hours.
FEATURES
See Notifact's article in this issue for more information. http://www.notifact.com/
New! Raynger® MiniTemp
Introducing the MiniTemp noncontact thermometer, Rayteks newest addition to the portable product family. Pocket-sized and easy to use, Minitemp comes in two versions: MT2 without laser and MT4 with laser. The optional accessory package includes a soft pouch and wrist strap.
MiniTemppriced to fit any toolbox and small enough to fit in your pocket. http://'www.RAYTEK.COM
Duct Air Quality Transmitter (AQS-D)
TRIATEK's AQS-D Series Duct Air Quality Transmitter is a high quality, solid state device that senses the level of contaminant gases in air ducts and accurately converts that level to a 0-10 VDC output signal. The AQS-D monitors the air quality so the HVAC control system can adjust the amount of fresh air required for comfort as well as health. Also, energy costs can be reduced by minimizing the amount of outdoor fresh air during periods of little or no occupancy. http://www.triatek.com/
Room Air Quality Transmitter (AQS-R)
TRIATEK's AQS-R Series Duct Air Quality Transmitter is a high quality, solid state device that senses the level of contaminant gases in indoor environments and accurately converts that level to a 0-10 VDC output signal. The AQS-R monitors the air quality so the HVAC control system can adjust the amount of fresh air required for comfort as well as health. Also, energy costs can be reduced by minimizing the amount of outdoor fresh air during periods of little or no occupancy.
HygroLog
Hygrolog-D Accuracy: ± 1.5%RH / ±0.3°C Fully programmable: start/stop or loop
recording, alarm functions, °C/°F, etc. Allows up to 416 days of recording Plug-in, 100%
interchangeable HygroClip probe can be remoted with an extension cable Direct RS232
communication with the serial port of a PC (unplug the probe and replace with the data
cable supplied with the software) Full featured software (HW3) Splash proof enclosure
Available with or without LC display.
http://www.rotronic-usa.com/
Dwyer Model VT120 Integral Vane Thermo-Anemometer Large 11/4" Dual Display, One Hand Operation, RS232 Output
Simultaneously measure air velocity and temperature with the Model VT120 Integral Vane Thermo-Anemometer. Easily view readings on the large 1.25" (31.15 mm) dual display. User-selectable air velocity ranges include ft/min, m/sec, mph, knots, and km/hr. Built-in thermistor records ambient temperature in °F or °C. Model VT120 features include data hold and record/recall minimum, maximum and average readings. Also, units have the ability to record and average up to 2 hours of data while displaying the continuous running average. Download data to your computer via RS232 output. If desired, sleep mode automatically shuts down the meter after 20 minutes of non-use. Model VT120 includes hard carry case, one 9V battery, and instruction manual. http://www.dwyer-inst.com/
[Stay Informed -
Subscribe to our Update Mailing List]
[Home Page] [Contact
Us] [The
Automator - Current Issue]
[News] [Systems] [Products] [Resources] [About]
Visit Home Toys to Learn about
Home Automation
Web Design by HomeToys
©Enviromation 1999