View from America:

I'd like to start off with a definition of the term 'daylighting' within the context of building design and construction. Daylighting is the use of building infrastructure (e.g., windows, skylights etc.) to capture direct sunlight whilst gaining the indirect sunlight from well-designed reflective materials. In building design, the challenge is to minimise energy usage whilst maximising occupant comfort, both visual and climatic. In practical terms, the goal is to minimise the use of electricity from lighting luminaires where windows, automated shading and dimming controls can be applied in harmony to maximise the daylight; this is otherwise known as 'daylight harvesting.'

When harvesting natural daylight, we need to take into account the outdoor weather, the existing room or space climate, and occupancy, to appropriately adjust the window shading or blinds in unison with dimming the artificial lighting. This is daylight management.

I will cover the key challenges and opportunities of daylight management in this article, and reveal how KNX can be used for optimal control.

Commercial blinds application for the Kirchheim hospital in Nürtingen, Germany (image source: NiceGroup).

Daylighting challenges

The challenge with daylight optimisation is to control the intensity and penetration of daylight for the ultimate comfort and productivity of the building occupant. The two main challenges with daylighting from a shade and blind controls perspective are:

In order to better understand shading, let's look at the positive and negative aspects of open and closed shades.

+ reduce some artificial lighting (and so offer electrical savings)
+ increase comfort and productivity with natural light
+ provide unobstructed outdoor viewing
- allow for solar heat gain in summertime (increasing the need for cooling)
- introduce glare to the leisure or workplace area (e.g. non-visible screen)

+ reduce solar heat gain in summertime (decreasing the need for cooling)
+ reduce glare on leisure or workplace area (e.g. visible computer screen)
+ increase security and privacy
+ improve insulation (reducing heating and cooling loads)
- increase artificial lighting usage in absence of natural sunlight
- do not capture the solar heat gain to reduce the wintertime heating requirements
- decrease comfort and productivity with the absence of natural sunlight

Using photosensors and lighting control, the lighting level in an interior daylit space can be kept at the right level for the time of day whilst saving energy.

These pros and cons can all be addressed through automation in order to reduce electrical lighting and HVAC consumption and improve productivity. For maximum efficiency; however, it is also crucial to closely monitor weather conditions, anticipate seasonal solar availability and model that to the actual building site location, orientation and various building functional areas throughout the facility.

Ideally, depending on how much natural light a space is exposed to, shades/blinds should open sufficiently to let in the required daylight, but not too much glare (and heat in summer). On winter days, we would want to extract as much light and heat from the sun as possible, whilst topping up with lighting and heating when required.

KNX meets all daylighting challenges

You guessed it; for daylight challenges, KNX is the ideal solution! With its device intelligence and interoperability with other building systems, KNX can be used to integrate shade and blind control with lighting and HVAC, to improve comfort and reduce energy consumption.

To continue reading, click here

Philip R. Juneau is the Chief Commercial Officer for Automated Technology Company (ATC), and Vice President of the KNX USA National Group. ATC's mission is to transform today's buildings into tomorrow's net-zero infrastructure by ensuring the highest levels of safety, comfort and efficiency for the overall well-being of the occupants and the overall environment.

www.atcjomo.com

Events	Want Ads
Our Sponsors	Resources